+607-585 9720

sales@preferredalloys.com.sg

6061 Aluminium Pipe

6061 Aluminium Pipe

6061 Aluminium Pipe

Designed for use in aerospace, fittings, valves, drive shafts, couplings, structural, signs, and marine applications.

More Information
The 6061 aluminium pipe is a heat treated aluminium that has been fused with silicon and magnesium. This product is widely used for various types of applications in many different industries. This grade of alloy can be easily welded and machined. It has a 90% machinability rating and has a high finish once completed. Cold working can be easily performed when 6061 aluminiums are in the annealed condition. At this point, standard methods of cold working be used for deep drawing, tapping, cutting, drilling, bending and stamping.

The common applications that the 6061 aluminium alloy is used for include jigs, machine parts, marine components, fasteners, truck components, appliance fittings, camera lens mounts and electrical fittings. For heavy duty structures that need high corrosion resistance and a good strength-to-weight ratio, 6061 aluminiums can be used for this purpose.

Forging can be used for this product, which is recommended to be done at temperatures sitting between 750 and 900 degrees F. Hot working should be done using a temperature between 500 and 700 degrees F. When solution heat treating is needed, it can be done continuously at 990 degrees F, thoroughly heating the metal. Water quenching should be done afterward. In order to harden this metal, 320 degrees F should be used continuously for 18 hours, then air cooling should follow. Then another eight hours of 350 degrees F, followed by air cooling.

Annealing is sometimes needed, which is recommended to be done continuously at 775 degrees F for two to three hours. A controlled dropping of the temperature should be applied, dropping 50 degrees F each hour until 500 degrees F is reached, then followed by air cooling.

The 6061 aluminium pipe is available in outside diameters between .5 and 4 inches round with various inside diameters. Length is up to 240 inches.

Tech Specs (inches)

Thickness Min: 0.5 inches
Max: 4 inches
Length Max: 240 inches
Width Min: 0
Max: 0
Other (Wall, Etc…) Min: N/A
Max: N/A
Tolerances Thickness: +/-1% OF NOMINAL DIAMETER
Width: 0
Length: +.25 inches to +.5 inches DEPENDING ON LENGTH

Additional Resources & Downloads
Additional Resources – The below information is available upon request and with your order.
  • Material Safety Data Sheet
  • Mill Certifications
  • Product Flyer
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter